Jabón blanco para grifo Sanei importación de Japón por NA

Descripción
Do not install near fire or in high temperature areas. Scrubbing with scrubber or dust can damage it. Clean with mild soap or warm water using a sponge or soft cloth. If the mounting surface or suction cup surface is dirty, it will not stick easily. Wipe clean before installation. The suction cup will allow air to enter gradually. Press the suction cups occasionally to release the air.
Características
Layout freely around the water. This soap is difficult to take a shower in the bath, and it drains easily Detachable construction for easy cleaning. The main unit can be disassembled for cleaning If the suction cup is difficult to attach, please purchase the special Super Supplement Board (PP780-75). No residue when removed and can be turned over and used without any residue [Suction Cup Installation Instructions] 1. Please check if the surface is compatible. The mounting surface must be flat without scratches, bumps, or stains. 2. Wipe the mounting surface clean with a damp cloth. 3. Clean the suction cup surface with water. Drain water without wiping the suction cup surface with a cloth. 4.Press the suction cup firmly to the wall and install it (If the suction cup falls) If the suction cup is not fully attached, or it falls off quickly, try the following things: If there is dust or dirt on the mounting surface and suction cup: Please wash it off with a mild detergent. If there are scratches or unevenness on the mounting surface, please purchase auxiliary board (PP780-75). If the suction cup is flat and deformed: Soak the suction cup surface up for 10 minutes in 176°F (80°C). One point: If you apply a very small amount of edible oil or water on the suction cup surface, it may adhere well Load Capacity: 21.3 oz (600 g); Heat Resistance: 140°F (60°C)
El número de Modelo (ItemModelNumber)
PW1812-W4
Peso
2.00 Pounds
Dimensiones
7.99 x 5.91 x 2.48 pulgadas
Fabricante es SANEI(旧社名:三栄水栓製作所)
Destacados
Layout freely around the water. This soap is difficult to take a shower in the bath, and it drains easily, Detachable construction for easy cleaning. The main unit can be disassembled for cleaning, If the suction cup is difficult to attach, please purchase the special Super Supplement Board (PP780-75). No residue when removed and can be turned over and used without any residue, [Suction Cup Installation Instructions] 1. Please check if the surface is compatible. The mounting surface must be flat without scratches, bumps, or stains. 2. Wipe the mounting surface clean with a damp cloth. 3. Clean the suction cup surface with water. Drain water without wiping the suction cup surface with a cloth. 4.Press the suction cup firmly to the wall and install it, (If the suction cup falls) If the suction cup is not fully attached, or it falls off quickly, try the following things: If there is dust or dirt on the mounting surface and suction cup: Please wash it off with a mild detergent. If there are scratches or unevenness on the mounting surface, please purchase auxiliary board (PP780-75). If the suction cup is flat and deformed: Soak the suction cup surface up for 10 minutes in 176°F (80°C). One point: If you apply a very small amount of edible oil or water on the suction cup surface, it may adhere well, Load Capacity: 21.3 oz (600 g); Heat Resistance: 140°F (60°C)