Freud LU90M012 Hoja de metal no ferroso de 12 pulgadas x 120T

Descripción
Reseña del editor Hoja de metal no ferroso de 12″ Tienda The 12-inch Freud LU90M012 Thin Stock Non-Ferrous Metal Cutting Saw Blade delivers smooth, burr-free finish when cutting thin aluminum and other non-ferrous metals. Featuring 120 teeth with TiCo high-density carbide tips and Freud’s Silver I.C.E. coating, which helps reduce heat buildup and prevent corrosion, this thin-stock blade is built to stand up to the demands of frequent use and tough metalwork applications.High Tooth Count and Triple-Chip Grind for Burr-Free FinishesBuilt to make quick, exact work of trimming and reshaping thin-wall materials crafted from aluminum, copper, or other non-ferrous metals, this blade features a large proportion of small teeth finished with a triple-chip grind. In this configuration, each flat-top tooth is followed by a trapezoidal tooth that’s slightly higher. The trapezoidal tooth delivers a precut slot that’s narrower than the final kerf, so the flat-top teeth can leave a finish that’s clean and true. Each tooth also features a positive 5-degree hook angle, which enables the blade to move efficiently and without binding.Also offering custom designed gullets that minimize chip buildup, this blade is designed for optimal performance when cutting metal walls that are less than 1/16-inch thick. It has a 1-inch arbor and produces a 0.118 kerf.Freud recommends that you use a liquid lubricant, like WD40, when cutting metals with this blade.Well-Balanced, Anti-Vibration DesignThis Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.High-Density Carbide for Maximum Cutting PerformanceThis thin-stock saw blade’s 120 teeth are finished with tips made from Freud’s application-specific TiCo high-density carbide «non-ferrous blend.» Formulated to extend tooth life in the face of demanding metalwork applications, this blend is extra impact-resistant–due to including more cobalt than other TiCo blends–and it still offers the mix of improved strength, density, corrosion resistance, and heat resistance that you expect from TiCo.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer–once again, saving you time and money.Silver I.C.E. Coating Resists Corrosion and Heat BuildupThis blade is finished with Freud’s Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. Its non-stick surface also helps prevent unwanted buildups. All this translates to less drag on the motor of your saw, which means longer tool life and longer blade life.This industrial saw blade is backed by Freud’s limited lifetime warranty.About Freud: A History of Innovative ManufacturingAn industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud’s full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. What’s in the BoxFreud LU90M012 Thin Stock Non-Ferrous Metal Cutting Saw Blade–12-inch diameter, 1-inch arbor, 120-tooth design.
Características
Especificaciones: eje 1 pulgada, diámetro 12 pulgadas, molienda TCG, ángulo de gancho -5°, corte .091 pulgadas, placa .071 pulgadas, dientes 120 Mezcla no ferrosa de carburo de alta densidad TiCo para un máximo rendimiento Freud – Carburo TiCo fabricado específicamente para cortar metales no ferrosos que prolonga la vida útil de los dientes Los ángulos de gancho negativos producen un corte más suave en metales no ferrosos con menos distorsión del material y cortes sin rebabas El revestimiento de hielo plateado resiste la corrosión y la acumulación de paso
El número de Modelo (ItemModelNumber)
‎LU90M012
Peso
1.00 Libras
Dimensiones
1 x 1 x 1 pulgadas
Fabricante es ‎Freud
Destacados
Especificaciones: eje 1 pulgada, diámetro 12 pulgadas, molienda TCG, ángulo de gancho -5°, corte .091 pulgadas, placa .071 pulgadas, dientes 120, Mezcla no ferrosa de carburo de alta densidad TiCo para un máximo rendimiento, Freud – Carburo TiCo fabricado específicamente para cortar metales no ferrosos que prolonga la vida útil de los dientes, Los ángulos de gancho negativos producen un corte más suave en metales no ferrosos con menos distorsión del material y cortes sin rebabas, El revestimiento de hielo plateado resiste la corrosión y la acumulación de paso
La calificación que le dan a Freud LU90M012 Hoja de metal no ferroso de 12 pulgadas x 120T, 34 usuarios es de 4.3 sobre 5 estrellas.
El País de Origen (COO, siglas en inglés) o fabricación del producto Freud LU90M012 Hoja de metal no ferroso de 12 pulgadas x 120T es ‎Italia.